Skip to main content
Use Carrier import with your Vonage API key and secret for automatic number setup. Follow the steps below if you manage the trunk in the Vonage SIP Dashboard.

Configure the trunk in Vonage

  1. In Famulor, open Settings → Phone numbers → Add a number → Add SIP integration, select your SIP region, and copy the SIP URI.
  2. In the Vonage Dashboard, open Voice → SIP. Start the setup wizard or select Create new. In the wizard, choose Something else for a generic SIP connection.
  3. Under Outbound Calling, copy the trunk SIP domain from Vonage and configure the SIP user key and secret. Use these as the Famulor outbound credentials.
  4. Under Inbound Calling, enter the Famulor SIP URI and assign a Vonage phone number to the trunk. Vonage SIP Dashboard guide.
Vonage Dashboard Voice menu with SIP selected

Open the SIP section in the Vonage Dashboard.

Vonage provider selector with the Something else option highlighted

The setup wizard offers Something else for a custom SIP destination.

Copy the SIP domain and outbound SIP credentials from Vonage.

Copy the SIP domain and outbound SIP credentials from Vonage.

Vonage wizard asking for the SIP address

Enter your Famulor SIP destination in the Vonage setup wizard.

Vonage number picker with a masked phone number

Choose the Vonage number to attach to the trunk.

Complete the SIP integration in Famulor

Enter the exact Vonage DID in +E.164 under Phone number (DID) and select Provider source IPs. Enter the Vonage trunk hostname under Termination address and the SIP user key and secret under Outbound authentication. Save and assign the number to an assistant. Vonage recommends allowing both primary platform subnets because SIP traffic can originate from either:
Vonage documents UDP/TCP on 5060 and TLS on 5061. Use the same transport at both ends and keep RTP/media rules separate from SIP signaling authentication. Recipient and caller identity use E.164.
Vonage does not support SIP REFER, so a cold transfer fails over a Vonage trunk. Configure any assistant transfer on this trunk as a warm transfer instead.
Use Warm Transfer for an assistant transfer. Select the outbound number and enter the destination phone number, or use a custom SIP target if your receiving system accepts one. Vonage SIP REFER support · Assistant transfer options.

What to enter in Famulor

The screenshots use the English app labels.
Incoming calls in Famulor

Incoming calls in Famulor

  • Your phone number (DID) · Enter the exact number delivered by Vonage, with its country code and leading + for an E.164 DID.
  • Inbound authentication / Allowed source IPs · Choose Provider source IPs and enter the complete SIP signaling list for Vonage and the selected route.
Example in the English app

Example in the English app

Use your own number, provider settings and SIP login. The password field is blank in the example.
  • Termination address · Use the provider hostname from the setup above (SIP domain). Enter only the hostname, without a SIP prefix or port.
  • Outbound authentication / SIP username / SIP password · Select Username / password when using Digest. Enter the SIP login and password from SIP user key / secret.

Validate

Call the routed DID externally and confirm a new inbound platform call, the assigned assistant, and two-way audio. If no inbound record appears, verify the Vonage destination URI and source subnet before changing number matching. Place a separate outgoing test call using the connected number. Sources: Vonage SIP dashboard, Vonage technical details, Vonage allowlist. Accessed 22 August 2026.